Rib Rollers / Food Rollers / Grab Rollers

      > > STOCK ITEM

• PACKAGED: Per Order Request
• Roller OD: 3" (With 1/8" High Ribs)
• Total Ribs: 18
• Roller Lengths Available: 24", 29 1/2"
• Bore Sizes Available: (Square) 1 1/4", (Round) 7/8"
• Rubber Hardness Available: 40 Duro (Standard), 55 Duro, 70 Duro

P24RR40-S – 24” Long Rib Roller 1 1/4" Square Bore, 40Durometer
P24RR55-S – 24” Long Rib Roller 1 1/4" Square Bore, 55 Durometer
P24RR70-S – 24” Long Rib Roller 1 1/4" Square Bore, 70 Durometer
P295RR40-S – 29 1/2” Long Rib Roller 1 1/4" Square Bore, 40 Durometer
P295RR55-S – 29 1/2” Long Rib Roller 1 1/4" Square Bore, 55 Durometer
P295RR70-S – 39 1/2” Long Rib Roller 1 1/4" Square Bore, 70 Durometer
P24RR40-R – 24” Long Rib Roller 7/8" Round Bore, 40 Durometer
P24RR55-R – 24” Long Rib Roller 7/8" Round Bore, 55 Durometer
P24RR70-R – 24” Long Rib Roller 7/8" Round Bore, 70 Durometer
P295RR40-R – 29 1/2” Long Rib Roller 7/8" Round Bore, 40 Durometer
P295RR55-R – 29 1/2” Long Rib Roller 7/8" Round Bore, 55 Durometer
P295RR70-R – 39 1/2” Long Rib Roller 7/8" Round Bore, 70 Durometer

  Rib Rollers - Bonded to Steel Shafts

      > > NON STOCK ITEM - Lead Time Required

• PACKAGED: Per Order Request
• Roller OD: 3" (With 1/8" High Ribs)
• Total Ribs: 18
• Roller Lengths Available: 24", 30"
• Rubber Hardness Available: 70
• Shaft Configurations: See Below
• Manufactured Upon Request - Please Allow For Lead Time

PCM24CR70 (30" Long Shaft) – 24” Centered Rubber Rib Roller (3" Extended Each Side), Bonded, 1" Dia 1018 CRS Smooth Shaft, 70-75 Durometer >> Idler Roller

PCM24RR70 (32 1/2" Long Shaft) - 24" Offset Rubber Rib Roller (3" Extended Smooth Side, 5 1/2" Extended Threaded Side), Bonded, 1" Dia 1018 CRS, Threaded w/Keyway, 70-75 Durometer >> Drive Roller

PCM30CR70 (37" Long Shaft) – 30” Centered Rubber Rib Roller (3 1/2" Extended Each Side), Bonded, 1" Dia 1018 CRS Smooth Shaft, 70-75 Durometer >> Idler Roller

PCM30RR70 (39 3/8" Long Shaft) - 30" Offset Rubber Rib Roller (3 5/8" Extended Smooth Side, 5 3/4" Extended Threaded Side), Bonded, 1" Dia 1018 CRS, Threaded w/Keyway, 70-75 Durometer >> Drive Roller

  Acorn Rollers / Sizing Rollers / Knobby Rollers

FULL SIZE ROLLERS

HALF SIZE ROLLERS

      > > STOCK ITEM

• PACKAGED: Per Order Request
• Roller Width: 3" Full
• Roller OD: 4"
• Bore Sizes Available: (Square) 1 1/4", 1 1/2" - (Round) Special Order

ARF12540 – Acorn Roller, 1 1/4" Square Bore, 40 Durometer, FULL Size
ARH12540 – Acorn Roller, 1 1/4" Square Bore, 40 Durometer, HALF Size
ARF15040 – Acorn Roller, 1 1/2" Square Bore, 40 Durometer, FULL Size
ARH15040 – Acorn Roller, 1 1/2" Square Bore, 40 Durometer, HALF Size

  25" Long Deflector Peg Strips

Available in both LEFT and RIGHT peg options. Rubber pegs are bonded to a metal plate with mounting holes located on both ends.

      > > LIMITED STOCK ITEM

• LIMITED QUANTITIES AVAILABLE!
• PACKAGED: Per Order Request
• Deflector Length: 25"
• Deflector Plate Width: 1 1/2"
• Peg Height: Staggered Height 1 3/4" to 2 1/8" From Plate Surface

523402LM - 25" Long Deflector Pegs, Left Molded, 55 Durometer
523402RM - 25" Long Deflector Pegs, Right Molded, 55 Durometer

  3 Point Shaker (hard rubber) - Spindle Style

      > > STOCK ITEM

• PACKAGED: Per Order Request
• Shaker OD: 7"
• Outside Hub Width: 2 1/4"
• Inside Hub Width: 1 1/2"
• Bore Size Available: 1" (Spindle Style)

HC3PS1150 - 3 Point Shaker, 1" Round Bore, 95 Durometer (Hard Rubber)

 4" Hard Rubber Idler Rollers - No Bearing

Friction reduction slip agent formulated in the rubber material. PCM exclusive custom mix!

Bore can either be SMOOTH or RIFLED to help reduce excessive premature wear from contact with; Dirt, Sand or Crop Extract (acidic juice).

      > > STOCK ITEM

• PACKAGED: 50 Per Case
• Roller OD: 4"
• Roller Track Width: 1"
• Roller Hub Width: 1 1/4"
• Bore Sizes Available: 1" Smooth or 1" Rifled (Spindle Style)
• Bore Size Options: 5/8" or 3/4"

FB4100R - 4" OD Idler Roller, 1" Round RIFLED Bore, 95 Durometer
FB4100S - 4" OD Idler Roller, 1" Round SMOOTH Bore, 95 Durometer

ECONOMY IDLER ROLLER

      > > STOCK ITEM

• PACKAGED: Per Order Request
• Roller OD: 4"
• Roller Track Width: 1"
• Roller Hub Width: 1 1/2"
• Bore Size Available: 1" (Spindle Style)

HC04100 - 4" OD Idler Roller, 1" Round Smooth Bore, 95 Durometer

 Spindles / Stand-offs

         Steel Construction

      > > LIMITED STOCK AVAILABLE

• PACKAGED: Per Order Request

SSHC1 - 1.25 Hub/Shoulder Length, 1.40 Shaft Length, .625 Bore
SSHC2 - 1.25 Hub/Shoulder Length, 1.325 Shaft Length, .625 Bore
SSHC2 - 1.25 Hub/Shoulder Length, 1.680 Shaft Length, .625 Bore

 Urethane Bushings - Custom Sizes Available

Custom Manufactured Bushings

What OD, ID, Length, Hardness, Tolerance and Color are you looking for?

Popular Size (part U1757592BL);

• OD: 1 3/4"
• ID: 3/4" Round
• Length: 2"
• Hardness: 92 Durometer

Custom built per your specifications - Very competitive pricing!