THIS SECTION IS CONTINUOUSLY UPDATED. IF THERE ARE ITEMS IN THIS CATEGORY THAT ARE OF INTEREST TO YOU, PLEASE CONTACT US FOR FURTHER INFORMATION OR USE OUR CONTACT FORM LOCATED ON THE HOME PAGE.
Ski-Doo Snowmobile Parts
ALL ITEMS ARE BRAND NEW and SHOW QUALITY!!!
If you have other products you would like to see manufactured just let us know.
Shown here are two different Foot Pads that are currently offered to fit the mid 1960's to early 1970's TNT, Olympic style sleds etc. See below for further details.
NEW molds have been designed to bring back these vintage items
Sold in pairs for both the right and left hand sides of the snowmobile
Constructed of high quality rubber material that is very durable
SKD1 Foot Pad measures: 30 3/4" Long x 5 1/4" Wide (Later Model)
SKD2 Foot Pad measures: 30 1/2" Long x 5 3/4" Wide (Earlier Model)
You may contact PCM Products direct for more information or to place an order please direct your calls to Dean Zimmerman at (218) 894-3024 (Vintage Reproduction) - northlandtool@staplesnet.com
Shown here is a Gas Filler Neck for the mid 1960's to early 1970's Ski-Doo Snowmobiles. See below for further details.
NEW molds has been designed to bring back these vintage items
Developed with high quality rubber material for fuel applications
Gas Filler Neck measures: 5 1/2" Long, 2" OD, 1 1/2" ID & 1 3/4" ID
Part #: SKDFN1
You may contact PCM Products direct for more information or to place an order please direct your calls to Dean Zimmerman at (218) 894-3024 (Vintage Reproduction) - northlandtool@staplesnet.com
Boatel Snowmobile Parts
Bogey Wheel Suspension for Grand Prix model sleds
These parts consist of steel mounting plates which are separated by high quality rubber specifically designed for this type of application. The rubber is bonded to the plates using the process of vulcanization. We then seal the part with a protective layer to help extend its life in the outdoor environments.
NEW molds have been designed to bring back these vintage items
Part measures: 9 3/4" long, 1 1/2" wide, 1 1/4" high excluding bolts
Part #: Boatel Bogey Suspension
You may contact PCM Products direct for more information or to place an order please direct your calls to Garry Carpenter at (218) 894-3301 or email your inquiries direct to backwoodscnc@q.com.
REO Gas Engine Fuel Tank Grommets
1949 - 1958 REO Engine Parts & More!
Grommet OD: 7/8"
Grommet ID: 5/16"
Grommet Height: 3/8"
Developed with high quality rubber material for fuel application
You may contact PCM Products direct for more information or to place an order please direct your calls to Garry Carpenter at (218) 894-3301 or email your inquiries to backwoodscnc@q.com. For further information regarding the history of the REO engines go to http://reoengine.us/ReoHistory.htm.
Part #: RFG1
Have additional small engine products that you would like to see manufactured? Whether rubber, plastic or metal fabricated - we can construct it for you. Custom manufacturing at just a phone call away. Contact PCM Products or Backwoods CNC today!
ATV Trench Wheel Tires
Trench Wheels won first prize in the Inventor's Showcase at the Manitoba Ag Days January 2005.
SAVE YOUR CROPS! Trench Wheels ATV Ditching Wheels Drain Excess Water With Minimal Crop Damage.
Standing water produced by heavy rains will destroy a good crop if not drained quickly. However, using heavy equipment to form runoff trenches creates huge ruts that can cause damage to spraying and harvest equipment.
The patent-pending Trench Wheels are available for all ATV models. New "Convert-a-Hub" bolt pattern plates adapt Trench Wheels to various ATV lug bolt patterns. Aggressive solid rubber lugs on the outer bead face provide traction and are self-cleaning in muddy and/or high residue conditions. The trench wheel tracks are handy markers to map out Fall ditching after harvest.
Contact Steve Raguse for further information at Raguse Mfg (MN)
Information LINK to the Trench Wheels website (Videos Are Available)!
Custom Built Skid Steer Attachments
GRAPPLE ASSEMBLY
Width: 60"
Ram Stroke: 8 1/4"
Cylinder psi: 2,500
Tines Construction: A50 Steel
Mounting: Bolt or Weld-on
Weight: 350 Lbs
Contact us for further information and pricing
BALE SPEARS - With cost in mind these are offered with the NO paint option. If protective covering is desired please see below for further information. Custom built ready to go at $395.00 each!!!
UNPAINTED - These are offered in manufactured state - NO paint!
Option - Urethane sealant primer and long lasting paint - add $200.00
Universal Mounting Bracket
44" Long (removable) main spear with 36" extended (2" Dia Spear)
(2) Lower side spears at 16" with 12" extended (1 1/4" Dia Spears)
45" Wide durable frame
A36 Steel frame construction
Field proven stress-proof tines
DIRT BUCKETS
Wall Thickness: Standard 3/8" (or your specifications)
Overall Dimensions (size): All Custom (per your request)
Contact us for further information and pricing
CUSTOM BUILT BUCKETS
Wall Thickness: Standard 3/8" (or your specifications)
Overall Dimensions (size): All Custom (per your request)
Contact us for further information and pricing
TOOTH / MANURE BUCKETS
Wall Thickness: Standard 3/8" (or your specifications)
Overall Dimensions (size): All Custom (per your request)
Contact us for further information and pricing
MATERIAL BUCKETS
Wall Thickness: Standard 3/8" (or your specifications)
Overall Dimensions (size): All Custom (per your request)
Contact us for further information and pricing
UNIVERSAL PLATES
Inside Height: 16"
Inside Width: 44 1/2"
Overall Width: 45"
Contact us for further information and pricing
Innovative Ideas
INNOVATIVE STUD FINDER - For sheetrock to metal studded fabricated buildings. Call for further details.
Patent Protected
Finger Slot Swing Action
Material: Plastisol (Soft)
Magnet: 25 Ft Lb Pulling Force, 3/4" Spherical
Color: Optional
PCM Products always takes it one step further for our customers. Bring us a design, and we will offer ideas to help add excitement to your product line. Special attention to detail is a priority of ours. We believe anything that can draw an increase in exposure to your product will always help boost your sales.
We are currently creating additional content for this section. Please stop by again. Thank you for your interest!
THIS SECTION IS CONTINUOUSLY UPDATED. IF THERE ARE ITEMS IN THIS CATEGORY THAT ARE OF INTEREST TO YOU, PLEASE CONTACT US FOR FURTHER INFORMATION OR USE OUR CONTACT FORM LOCATED ON THE HOME PAGE.
ALL ITEMS ARE BRAND NEW and SHOW QUALITY!!!
Shown here are two different Foot Pads that are currently offered to fit the mid 1960's to early 1970's TNT, Olympic style sleds etc. See below for further details.
Shown here is a Gas Filler Neck for the mid 1960's to early 1970's Ski-Doo Snowmobiles. See below for further details.
Bogey Wheel Suspension for Grand Prix model sleds
These parts consist of steel mounting plates which are separated by high quality rubber specifically designed for this type of application. The rubber is bonded to the plates using the process of vulcanization. We then seal the part with a protective layer to help extend its life in the outdoor environments.
1949 - 1958 REO Engine Parts & More!
You may contact PCM Products direct for more information or to place an order please direct your calls to Garry Carpenter at (218) 894-3301 or email your inquiries to 
Have additional small engine products that you would like to see manufactured? Whether rubber, plastic or metal fabricated - we can construct it for you. Custom manufacturing at just a phone call away. Contact PCM Products or Backwoods CNC today! 
SAVE YOUR CROPS! Trench Wheels ATV Ditching Wheels Drain Excess Water With Minimal Crop Damage.
Standing water produced by heavy rains will destroy a good crop if not drained quickly. However, using heavy equipment to form runoff trenches creates huge ruts that can cause damage to spraying and harvest equipment.
The patent-pending Trench Wheels are available for all ATV models. New "Convert-a-Hub" bolt pattern plates adapt Trench Wheels to various ATV lug bolt patterns. Aggressive solid rubber lugs on the outer bead face provide traction and are self-cleaning in muddy and/or high residue conditions. The trench wheel tracks are handy markers to map out Fall ditching after harvest.
GRAPPLE ASSEMBLY
BALE SPEARS - With cost in mind these are offered with the NO paint option. If protective covering is desired please see below for further information. Custom built ready to go at $395.00 each!!!
DIRT BUCKETS
CUSTOM BUILT BUCKETS
TOOTH / MANURE BUCKETS
MATERIAL BUCKETS
UNIVERSAL PLATES
INNOVATIVE STUD FINDER - For sheetrock to metal studded fabricated buildings. Call for further details.
PCM Products always takes it one step further for our customers. Bring us a design, and we will offer ideas to help add excitement to your product line. Special attention to detail is a priority of ours. We believe anything that can draw an increase in exposure to your product will always help boost your sales.
